|
Post by motorcarman on Jun 15, 2016 19:19:42 GMT -5
I bought a model 07 knowing that ammo would be a challenge to find. I'll just make my own. The Accurate website estimated a 3 week turnaround for the #35-175AG but I filled out the request form and paid. The next morning I got an email that said the 2 cavity mould SHIPPED. They must have had one on the shelf waiting for me to order it? I bought some 360 Dan Wesson cases from Starline Brass. I converted a few hundred to 351 WSL. They are easier than the 30 Winchester to 30 Remington!!!!!!!!!! Same process as the 30 Remington conversion to chuck them up in a drill press and use a coarse file to trim the brass rim and extraction groove. I have some 357 Maximum brass but it is TOO LONG to trim compared to the 360 DW. I think I will sell the 357 Max brass and stick with the 360 DW. Thanks for all the good reading and suggestions on this site. bob
|
|
|
Post by battis on Jun 28, 2016 22:39:58 GMT -5
I've had great luck using .357 Magnum brass for the .351WSL. Just turn the rim down with a file and drill press (no extractor groove). I'm able to get 17 grs IMR 4227 in the case, which is enough to work the action. I use .38 brass for the .35WSL.
Accurate Molds is a great company to deal with.
|
|