|
Post by acesdugout on May 20, 2013 20:04:34 GMT -5
Howdy All I'm looking for the Cartridge Stop Screw for my project gun. I've ordered from 2 suppliers and both had them listed but both sent me the Main Spring Screw instead they both said they were sorry but I'm still without the screw. I did some work on a clients gun and his was missing so I used mine thinking I'd be able to replace it no joy. any assistance would be welcome. I'm working on producing a magazine cap/spanner for a lathe project So I'll make sure to make a note here on the 200 section when it's done but school comes first this is a side project unless I find a demand for them I'll try to speed up the process as I learn the lathe. thanks for any assistance on my quest. If you want to keep track of the parts project check out my site below yours in service James Acerra Owner/Gunsmith/Armorer in training.www.acesdugout.tripod.comAttachments:
|
|
|
Post by Hardrada55 on May 25, 2013 10:19:17 GMT -5
James, I looked through my small assortment of parts and compared what I have to the component parts list and I don't have a Cartridge Stop Screw. Please let me know what else you're looking for and I'll see if I have it. Walt
|
|
|
Post by acesdugout on May 31, 2013 18:37:46 GMT -5
Thanks Walt The Cartridge Stop Screw (#15) and the Handle Bar Lock Screw (p#39) are the same as in the OM as are the Cartridge Stop Nut (p#16) and Handle Bar Lock Nut (p# 40)/ But it's cool I'll keep searching I missed a receiver/buttstock/barrel parts gun by $10 at auction sold for $35. but it was close. I did finally find a mag cap/spanner and hope to make a copy on my lathe. Well here's to happy projects. Yours in service James Acerra
|
|