|
Post by gyrhed on Jun 8, 2019 1:24:25 GMT -5
I haven't even had time to take it apart and see what id anything might be done, but was hoping someone else had already done it and could tell me what they did. Mine is hard and creepy. If i had young good joints i could probably deal with it.
Anyone been down this road?
|
|
|
Post by 351winchester on Jun 8, 2019 15:49:58 GMT -5
It's supposed to be hard. Keeps it from going full auto. Take it down, hose it with wd40 use compressed air to get the wd out & put a little grease on the sear. You will notice less creep, but it's still got to be heavy.
|
|