|
Post by Hardrada55 on Sept 24, 2011 13:26:53 GMT -5
What different shell holders work for reloading .401 WSL?
|
|
|
Post by tx4445 on Sept 25, 2011 20:02:59 GMT -5
My Redding die set box says to use the #1 shell holder. That is the one for the .30-06 head size. I have never loaded factory cases, so I don't know how well they fit. I use modified .414 supermag cases, and that size shell holder is too tight. I use a Lee #2 shell holder, which is for the .30-06 head, but I had to lightly dremel the ID where it fits into the extractor groove on the case. Very slight adjustment, and it works fine. Hope that helps, P O Emerson
|
|
|
Post by mumintrollet on Feb 26, 2012 6:20:14 GMT -5
I was planing on using .30x39 brass for my .401SL and LEE recomends shell holder #12 for that Don't have factory brass either so i don't know if it fits.
|
|