|
Post by motorcarman on Sept 3, 2016 10:09:33 GMT -5
I finally got a notification from Graf and Sons that they have the plated .351 bullets in stock. I ordered 500 (5-100 round bags) and they arrived a few days ago. www.grafs.com/retail/catalog/category/categoryId/3985?At least now I have a choice of the plated or gas-checked lead that I cast from my mould. The DAN WESSON 360 Star-Line brass is only 20 thou too long and trims up nicely in the drill press to make perfect loads. Reading still has affordable die sets for the .351 WSL. Hope this helps somebody. bob
|
|
|
Post by blackbahart on Sept 5, 2016 18:10:05 GMT -5
I had RWTC import a few 1000s for me and they work wounderful !and have been using the 360DW brass also as its a little less cost as the rem 357Supermag seems to have dried up and whats left has gone up to a buck a case , Peter
|
|
|
Post by motorcarman on Sept 13, 2016 20:21:29 GMT -5
I bought some 357 MAXIMUM brass before I found the DW360 brass. If anyone needs the 357 MAXIMUM let me know. I am not going to trim that much off when the DW360 is so close in length.
bob
|
|
|
Post by rodinal220 on Sept 30, 2016 23:24:39 GMT -5
I will have to order some of these from Grafs to try out. I just noticed and posted a thread that Starline is making .357 max brass.I saw that Midway has/had Jamison .351 WSL brass but was sold out as of this post.I have never tried Jamison brass but have only read various posts on the net to mixed reviews.
|
|